APRILIA RSV MILLE R TUONO - 2003 Manual page 42

SETTING THE RED LINE THRESHOLD
(WITH ENGINE OFF ONLY)
W h e n t h e m a x i m u m r p m s e t i s
exceeded, the red line warning light
L E D " m a x " ( 2 ) p o s i t i o n e d o n t h e
dashboard starts blinking.
If the push button is pressed for less
than one second, the pointer of the
revolution counter (4) shifts to the red line
value set for three seconds, after which it
returns to its initial position.
42
use and maintenance RSV mille TUONO
For the adjustment, proceed as follows:
◆
Press the push button
press it again within 3 seconds. The
pointer (4) moves increasing the value
by 1000 rpm at each click, as long as
is kept pressed; when it has reached the
maximum value, it starts again from the
beginning.
◆
Press the push button
desired rpm value has been set.
◆
If the push button
p r e s s e d a g a i n w i t h i n 3 s e c o n d s ,
intermittently, the pointer (4) moves
increasing the value by 100 rpm at each
click; when it has reached the maximum
value, it starts again from the beginning.
- RSV mille R TUONO
NOTE
line at values lower than 2000 rpm or
higher than 12000 rpm.
, release it and
Never exceed the recommended rpm,
see p. 80 (RUNNING-IN).
◆
To confirm, release the push button
A f t e r t h r e e s e c o n d s , t h e r e d l i n e
until the
threshold setting is stored.
is released and then
NOTE
coming on of the red line warning light LED
"max" (2).
It is not possible to set the red
The setting is confirmed by the
.