Table of Contents
Advertisement
1
CHECKING AND TOPPING UP
Check the coolant level and top up the
expansion reservoir with cold engine.
◆
Stop the engine and wait until it has
cooled down.
◆
Keep the vehicle in vertical position, with
the two wheels resting on the ground.
◆
Make sure that the coolant contained in
the expansion reservoir (1) is included
between the "FULL" and "LOW" marks,
by checking through the appropriate slot
on the right fairing".
FULL = maximum level
LOW = minimum level
64
use and maintenance RSV mille TUONO
If not, proceed as follows:
◆
Unscrew and remove the filling cap (2).
The coolant is toxic: do not swallow it; if
the coolant gets in contact with the skin
or the eyes, it can cause serious
irritations.
Do not use your fingers or any other
object to check if there is enough
coolant.
Do not put additives or other subtances
into the fluid.
If you use a funnel or other similar
items, make sure that they are perfectly
clean.
- RSV mille R TUONO
◆
Top up the expansion reservoir by
adding coolant, see p. 144 (LUBRICANT
CHART), until this almost reaches the
"FULL" level. Do not exceed this level,
otherwise the fluid will flow out while the
engine is running.
◆
Put back the filling cap (2).
In case of excessive consumption of
coolant and in case the expansion
reservoir remains empty, make sure
that there are no leaks in the circuit.
Have it repaired by your local aprilia
Dealer.
Advertisement
Table of Contents
