APRILIA RS 125 TUONO - 2003 Manual page 211

RS 125 Tuono_Ing_book_my03.book Page 19 Tuesday, April 29, 2003 3:11 PM
1
How to use the "LAP TIME" function
(only for races in places that are closed
to traffic).
To initialize the computer for the timing
N
function, press the push button. The
letter" " (Lap) will blink on the display.
L
N To start the stop-watch, press the "LAP"
(1)push button, positioned on the left half
of the handlebars.
N To display the time taken for one lap,
press the "LAP" (1) push button again.
N After pressing the "LAP" (1) push button,
the time obtained in the previous lap is
displayed for about 15 seconds, after
which the current time is displayed
again.
N To end the timing, press the
button.
It is possible to carry out up to
10 timings.
At the last timing, the writing "
will appear on the display.
How to recall the time per lap (LAP
MEMORY).
N To recall the time per lap, press the
The writing " " will appear on the di-
splay.
N To run through the stored times per lap,
press the "LAP" (1) push button.
The writing " " corresponds to
01
lap no. 1, " 02 " corresponds to lap
push
no. 2 and so on.
1
How to delete the stored data.
N To delete the stored data, press the
push button.
L 10 L 10 "
L 10 L 10
The writing " L 10
08 ", etc. will appear on the display.
N Now, press the
keeping it pressed, press also the "LAP"
(1) push button on the left half of the han-
dlebars.
.
In this way the stored data will be defini-
tively deleted.
use and maintenance RS 125 Tuono
1
"," L 09 " or " L
push button and,
19