Figure 18 Isp Parameters: Ethernet Encapsulation; Table 12 Isp Parameters: Ethernet Encapsulation - ZyXEL Communications ZyWall 5 Series User Manual

Figure 18 ISP Parameters: Ethernet Encapsulation

The following table describes the labels in this screen.

Table 12 ISP Parameters: Ethernet Encapsulation

LABEL
ISP Parameters
for Internet
Access
Encapsulation
WAN IP Address
Assignment
IP Address
Assignment
My WAN IP
Address
My WAN IP
Subnet Mask
Gateway IP
Address
First DNS Server
Second DNS
Server
Chapter 3 Wizard Setup
DESCRIPTION
You must choose the Ethernet option when the WAN port is used as a regular
Ethernet. Otherwise, choose PPPoE or PPTP for a dial-up connection.
Select Dynamic If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static If the ISP assigned a fixed IP address.
The fields below are available only when you select Static.
Enter your WAN IP address in this field.
Enter the IP subnet mask in this field.
Enter the gateway IP address in this field.
Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do not
configure a DNS server, you must know the IP address of a machine in order to
access it.
ZyWALL 5/35/70 Series User's Guide
91