Figure 12 Isp Parameters : Ethernet Encapsulation; Table 9 Isp Parameters : Ethernet Encapsulation - ZyXEL Communications ZyWALL 5 User Manual

Hide thumbs Also See for ZyWALL 5:

Table of Contents

ZyWALL 5 User's Guide

Figure 12 ISP Parameters : Ethernet Encapsulation

The following table describes the labels in this screen.

ISP Parameters

for Internet

Encapsulation

WAN IP Address

You must choose the Ethernet option when the WAN port is used as a regular

Ethernet. Otherwise, choose PPPoE or PPTP for a dial-up connection.

Select Dynamic If your ISP did not assign you a fixed IP address. This is the

default selection.

Select Static If the ISP assigned a fixed IP address.

The fields below are available only when you select Static.

Enter your WAN IP address in this field.

Enter the IP subnet mask in this field.

Enter the gateway IP address in this field.

Chapter 3 Wizard Setup