Firmware Upgrade Using Smt; Figure 148 Smt: Utilities Main Menu - ZyXEL Communications VSG-1200 User Manual

Table 69 Firmware Upgrade: Scheduled (continued)
LABEL
Synchronization
Check File
Frequency
Apply

25.2.2 Firmware Upgrade Using SMT

Note: You must run a TFTP server on a computer where a firmware file is
stored to perform file upload.
Follow the steps below to configure the TFTP settings in the SMT. You must still have a WAN/
LAN connection between the VSG and the TFTP server computer at the same time.
1 Connect the computer directly to the VSG through the console port. Refer to the section
on establishing a console port connection for more information.
2 In the SMT main menu, type 5 and press [ENTER] to display the Utilities Menu screen.

Figure 148 SMT: Utilities Main Menu

Enter a numeric between 1 and 3.
3 Type 1 and press [ENTER] to display the Firmware Upgrade screen.
4 Enter the IP address of the computer running the TFTP server in the TFTP Server IP
Address field.
5 Specify the name of the firmware file in the Download Filename field.
Chapter 25 Configuration and Firmware Maintenance
DESCRIPTION
A Synchronization Check file is a file containing the latest firmware filename and
version number on the TFTP server. Click View Sample File to display an
example.
Enter the name of the check file.
Set how often (Weekly, Daily or Hourly) you want to have the VSG check for new
firmware and upgrade to new firmware if available (default Weekly).
Then select the day (applies only when you select Weekly), the hour (applies when
you select Daily or Hourly) and the minute that you want the VSG to do the check
and upload.
Click Apply to save the changes.
Utilities Menu
1)Firmware Upgrade
2)Change Password
3)Return to Main Menu
Enter selection:
VSG-1200 User's Guide
203