Table 4 System Tools: System Account - ZyXEL Communications VSG-1200 User Manual

Table 4 System Tools: System Account

LABEL
Administrator
Account
Username Enter the user name for the administrative account. The default is admin.
Accounting Manager
Username Enter the user name for the account manager account. The default is account.
Supervisor Account
Username Enter the user name for the supervisor account. The default is supervisor.
Super Subscriber
Account
Username Enter the user name for the super subscriber account. The default is super.
Apply
3.8 Resetting the VSG
Note: All your custom configuration will be erased once you reset the VSG.
You may choose to keep the subscriber account information and the port-
location mapping settings.
Follow the steps below to reset the VSG back to the factory default settings.
1 Click System Tools, Configuration to display the screen as shown next.
Chapter 3 The Web Configurator
DESCRIPTION
This account permits full access to all system configurations.
Password Enter a new administrative account password.
Confirm Enter the new administrator password again for confirmation.
This account allows you to set up subscriber accounts. No system configuration
is allowed.
Password Enter a new account manager password.
Confirm Enter the new account manager password again for confirmation.
This account allows you to view system status only.
Password Enter a new supervisor password.
Confirm Enter the new supervisor password again for confirmation.
You can use this account to test Internet connection between a computer
behind the VSG to the ISP. No time limit or billing is imposed on this account.
Password Enter a new super subscriber account password.
Confirm Enter the new super subscriber account password again for confirmation.
Click Apply to save the changes back to the VSG.
VSG-1200 User's Guide
47