Configuring Nat Pool; Figure 27 System Settings: Nat Pool; Table 15 Nat Example: One-To-One And Many-To-One - ZyXEL Communications VSG-1200 User Manual

Table 15 NAT Example: One-to-One and Many-to-One

SUBSCRIBER
S1
S2
S3

5.4 Configuring NAT Pool

Note: You only need to set the NAT address pool if the remote VPN server(s)
allows only one connection per source IP address.
Note: You need to acquire additional public IP address(es) from your ISP to
create NAT pool(s).
To set the NAT address pool, click System Settings and NAT Pool in the navigation panel. A
screen displays as shown next.

Figure 27 System Settings: NAT Pool

The following table describes the labels in this screen
Chapter 5 NAT Pool
ORIGINAL SOURCE IP TRANSLATED SOURCE IP
10.59.1.2
10.59.1.3
10.59.1.4
211.21.21.2
211.21.21.2
211.21.21.3
VSG-1200 User's Guide
67