ZyXEL Communications VSG1435-B101 - QUICK START GUIDE V1.10 Quick Start Manual

ZyXEL Communications VSG1435-B101 - QUICK START GUIDE V1.10 Quick Start Manual

802.11n wireless vdsl2 4-port gateway with hpna
Hide thumbs Also See for VSG1435-B101 - QUICK START GUIDE V1.10:

Advertisement

VSG1435-B101 Series
802.11n Wireless VDSL2 4-port
Gateway with HPNA
Firmware v1.10
Edition 1, 9/2010
DEFAULT LOGIN DETAILS
IP Address:
User Name:
Password:
www.zyxel.com
http://192.168.1.1
admin
1234
Copyright 2010
ZyXEL Communications Corporation

Advertisement

Table of Contents
loading

Summary of Contents for ZyXEL Communications VSG1435-B101 - QUICK START GUIDE V1.10

  • Page 1 VSG1435-B101 Series 802.11n Wireless VDSL2 4-port Gateway with HPNA Firmware v1.10 Edition 1, 9/2010 DEFAULT LOGIN DETAILS IP Address: http://192.168.1.1 User Name: admin Password: 1234 Copyright 2010 ZyXEL Communications Corporation www.zyxel.com...
  • Page 2 Device Panels POWER POWER RESET ETHERNET 1-4 ETHERNET WAN ETHERNET WAN HPNA ETHERNET 1-4 DSL WAN INTERNET HPNA WLAN/WPS DSL WAN...
  • Page 3: Hardware Setup

    VSG1435-B101 Series Overview The VSG1435-B101 is a VDSL2 router and Gigabit Ethernet gateway with Home Phoneline Networking Alliance (HPNA) capability, a four-port built-in Ethernet switch and IEEE 802.11n wireless. The VSG1435-B101 allows wired and wireless clients to safely access the Internet. The built- in firewall blocks unauthorized access to your network.
  • Page 4 To connect the stand, line up the arrow on the stand with the arrow on the bottom of the device as shown.
  • Page 5 VSG1435-B101 Series To connect your VSG1435-B101: 1. Attach the antenna and point it up.
  • Page 6 2. Do one of the following for your Internet connection: a. DSL WAN: Use a telephone cable to connect your VSG1435- B101’s DSL port to a telephone jack (or the DSL or modem jack on a splitter if you have one). b.
  • Page 7 VSG1435-B101 Series • The HPNA light stays on if the HPNA port is properly connected and blinks when there is traffic. • The DSL WAN light turns on when your VSG1435-B101 has a DSL connection. • The WLAN / WPS light flashes green and orange while WPS is in process.
  • Page 8: Set Up A Wireless Network

    Set Up a Wireless Network You can set up a wireless network using the following methods: Using Wireless Protected Setup (WPS) Press the WPS button on the VSG1435-B101’s front panel for more than 5 seconds to turn the WPS function on. Follow these steps to add a WPS-enabled device to the wireless network using the WPS/WLAN button.
  • Page 9 VSG1435-B101 Series Set Up a Wireless Network Manually The wireless LAN on your VSG1435-B101 is enabled by default. To add a wireless client to the network, use the settings found on the bottom panel of your VSG1435-B101, which will look similar to the following example: SSID: ZyXEL00561 Security Mode: WPA-PSK...
  • Page 10 1. In your browser, if the VSG1435-B101 does not automatically re- direct you to the login screen, go to http://192.168.1.1. 2. Enter the default user name admin and password 1234. Click Login. If the login screen does not open, make sure you allow web browser pop-up windows, JavaScripts and Java permissions.
  • Page 11 VSG1435-B101 Series 4. In the next screen, you can change the login password. This is recommended. Enter your new password in the New Password field. Re-type your new password in the second field and then click Apply. If you prefer not to change the password, leave the two fields blank and click Skip.
  • Page 12 5. The Network Map page appears. This shows whether the VSG1435- B101 and computers/devices connected to it have Internet access.
  • Page 13 VSG1435-B101 Series 6. Click Status to display the following screen, where you can view the VSG1435-B101’s device, interface, and system information.
  • Page 14 Viewing Certifications • Go to www.zyxel.com. • Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. • Select the certification you wish to view from this page or click on...
  • Page 15: Fcc Statement

    VSG1435-B101 Series FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This manual is also suitable for:

Vsg1435-b101 series

Table of Contents