Pptp; Table 8 System Settings: Wan/Lan: Pppoe - ZyXEL Communications VSG-1200 User Manual

Table 8 System Settings: WAN/LAN: PPPoE

FIELD
WAN Port Mode
Username
Password
PPP MTU Setting
TCP MSS Setting
Service Name
Connect on Demand Select this option when you don't want the connection up all the time and specify
Keep Alive

4.7.4 PPTP

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables transfers of data
from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/
IP-based networks.
PPTP supports on-demand, multi-protocol, and virtual private networking over public
networks, such as the Internet.
Chapter 4 LAN, WAN and Server Setup
DESCRIPTION
PPPoE Select this option to activate PPPoE support.
Enter the user name exactly as your ISP assigned. If assigned a name in the
form user@domain where domain identifies a service name, then enter both
components exactly as given.
Enter the password associated with the user name above.
Enter the size of a Maximum Transmission Unit (MTU).
Enter the size of the Maximum Segment Size (MSS).
Enter the name of your PPPoE service.
an idle timeout in the Max Idle Time field (maximum 65535 minutes). This is the
default setting with an idle timeout of 10 minutes.
Select this option when you want the Internet connection up all the time and
specify a redial period in the Redial Period field (maximum 65535 seconds).
When disconnected, the VSG will attempt to bring up the connection after the
redial period.
VSG-1200 User's Guide
57