Configuration And Firmware Maintenance; Configuration And Firmware Maintenance Overview; Filename Convention; Firmware Upgrade - ZyXEL Communications ZyXEL Vantage VSG-1000 User Manual

Zyxel communications vantage service gateway user's guide
Hide thumbs Also See for ZyXEL Vantage VSG-1000:
Table of Contents

Advertisement

Configuration and Firmware Maintenance

This chapter shows you how to upgrade the firmware and configuration file and create configuration

14.1 Configuration and Firmware Maintenance Overview

You need to run a TFTP server on a computer where the firmware and/or configuration files are stored to perform
file upload or download. Use either the web configurator for file upload and download. You can configure the
TFTP settings in the SMT but you must still have a WAN connection between the VSG and the TFTP server
computer at the same time.
Do not interrupt the file upload process as this may PERMANENTLY damage the device.

14.2 Filename Convention

The firmware or the configuration files do not have any filename conventions. There is not a specific file extension
or filenames conventions that you need to follow. Therefore, you can specify any name or file extension for the
firmware and the configuration files.
However, it is recommended to use the ".bin" file extension for the firmware file and ".rom" for the configuration
file for management purposes.
Visit
www.zyxel.com
to download the latest version of firmware for your VSG.

14.3 Firmware Upgrade

The following sections show you how to upgrade the firmware.
14.3.1

Firmware Upgrade Using SMT

Follow the steps below to prepare for firmware upload using the SMT.
Run a TFTP server program and specify the location of the firmware file and the communication mode.
Step 1.
Refer to the TFTP server program user's guide for instructions.
Connect the computer directly to the VSG through the console port and the WAN port. Refer to the
Step 2.
section on establishing port connections for more information.
In the SMT main menu, type 3 and press [ENTER] to display the Utilities Menu screen.
Step 3.
Enter a numeric between 1-3.
Configuration and Firmware Maintenance
WARNING!
Utilities Menu
1)Firmware Upgrade
2)Change Password
3)Return to Main Menu
Enter selection:

Figure 14-1 SMT: Utilities Menu

VSG-1000 Vantage Service Gateway
Chapter 14
backup files.
14-1

Advertisement

Table of Contents
loading

Table of Contents