Figure 137 Smt: Wan Configuration: Pppoe; Table 65 Smt: Wan Configuration: Pppoe - ZyXEL Communications VSG-1200 User Manual

Figure 137 SMT: WAN Configuration: PPPoE

WAN Type? (D/S/P/T)
Username
Password
Connect Setting? (C/K)
Max idle Time(Min)
Optional Setting
Service name
PPP MTU Setting
TCP MSS setting
The following table describes the PPPoE related fields in this menu.

Table 65 SMT: WAN Configuration: PPPoE

FIELD
WAN Type? (D/S/
P/T)
Username
Password
Connect Setting?
(C/K)
Redial Period
(Sec)
Max Idle Time
(Min)
Optional Setting
Service Name
PPP MTU Setting
TCP MSS Setting
At the "S)ave and return R)eturn without saving M)odify:" prompt, type S and press [ENTER] to save
the changes and return to the previous screen, type R and press [ENTER] to discard all changes and
return to the previous screen or type M and press [ENTER] to continue configuring the fields. Restart
the device when prompted
Press [ESC] and enter Y to stop any actions in the current screen and return to the previous screen. All
changes will be discarded.
Chapter 24 LAN and WAN Setup Using the SMT
WAN Configuration
:P
:
:
:C
:10
:
:1492
:1452
DESCRIPTION
Enter P to enable PPPoE support.
Enter the login user name assigned to you by your ISP.
Enter the password associated with the user name above.
Enter C (Connect on demand) when you don't want the connection up all the time
and specify an idle time-out in the Max. Idle Timeout Setting field. This is the
default selection.
Enter K (Keep alive) when you want your connection up all the time and specify
the redial time in the Redial Period field to set how long the VSG waits before trying
to bring up the connection automatically if it is disconnected.
The field is only visible when you select K in the Connect Setting field.
Type the time in seconds that elapses before the VSG automatically attempts to
reconnect to the PPPoE server. The default is 30 seconds.
This field is only visible when you select C in the Connect Setting field.
Type the time in minutes that elapses before the VSG automatically disconnects
from the PPPoE server. The default is 10 minutes.
Enter the name of your Internet service provider.
Enter the size of a Maximum Transmission Unit (MTU).
Enter the size of the Maximum Segment Size (MSS).
VSG-1200 User's Guide
193