Table 82 Vsa-Related Error Messages - ZyXEL Communications VSG-1200 User Manual

Error Messages
The following table describes the VSA-related error messages.

Table 82 VSA-related Error Messages

ERROR MESSAGE
VSA Error!-Traffic limit-
Time to finish is selected
VSA Error!-Traffic limit-
Over value
VSA Error!-SMTP Redirect-no
SMTP server setup
VSA Error!-BW-up/down-
Bandwidth Management
=disable
VSA Error!-BW-up/down-Equal
bandwidth for all
subscriber selected
VSA Error!-BW-up/down-Class
of service is selected but
no BW-up/down
VSA Error!-BW-up/down-No
BW-down
VSA Error!-BW-up/down-No
BW-up
VSA Error!-BW-up/down-BW-up
out of range
VSA Error!-BW-up/down-BW-
down out of range
Appendix D Vendor Specific Attributes
DESCRIPTION
The VSG is set to use the "Time to Finish" mode while the
VSA response from the external RADIUS server include the
Traffic-limit attribute.
The value for Traffic-limit attribute is more than the
maximum allowed (4095).
No e-mail server configuration is set on the VSG while the
VSA response from the external RADIUS server indicates
SMTP redirection is activated (with an attribute value of 1).
Bandwidth management is not activated on the VSG while
the VSA response from the external RADIUS server
contains upload and download bandwidth limits.
Bandwidth management is activated on the VSG with equal
bandwidth applied to all subscribers.
Bandwidth management is activated on the VSG with class
of service selected while no upload/download bandwidth
information is obtained from the external RADIUS server.
The external RADIUS server does not send the BW-down
attribute value to the VSG.
The external RADIUS server does not send the BW-up
attribute value to the VSG.
The value for BW-up attribute is invalid.
The value for BW-down attribute is invalid.
VSG-1200 User's Guide
225