Pms (Property Management System); Port-Location Mapping Charge Modes - ZyXEL Communications VSG-1200 User Manual

VSG-1200 User's Guide
Table 20 System Settings: Billing: Billing Profile Setting (continued)
LABEL
Duration
Charge
Check Time
Selective Unit
Bandwidth Limit
Uplink
Bandwidth
Limitation
Downlink
Bandwidth
Limitation
Reset
Apply

7.2 PMS (Property Management System)

Many hotels use a PMS device to perform in-room billing for services (such as room service,
mini-bar, pay-per-view TV or telephone) that the guests use.
With PMS, the VSG allows subscribers to purchase additional time units online. In addition,
subscribers can select from a number of different billing plans.
To use PMS for billing, first connect the VSG to a PMS device using the PMS port (refer to
Chapter 2, "Hardware Installation and Connection," on page
settings on the VSG.

7.2.1 Port-Location Mapping Charge Modes

When you activate port-location mapping and PMS on the VSG, two charge modes are
available: per room and per subscriber.
80
DESCRIPTION
Select a time period (minute, hour, day, week, month or Unlimited) and enter the
time unit in the field provided (not available for Unlimited).
Specify the unit cost in this field.
Select Period Time Finish for time-to-finish billing method. Refer to
"RADIUS" on page 70 for more information.
Select Expired when and specify the time from the drop-down list box(es) for the
accumulate billing method. The subscriber accounts will be invalid once the
allocated time period is used up. This option is only available when you select the
Day, Week or Month option in the Period Time field.
Specify the range of time units (between 1 and 99) a subscriber is allowed to
purchase at any one time.
The range is presented as a drop-down list box in the information pop-up window.
Note: You must activate bandwidth management to use this feature.
Refer to Chapter 15, "Bandwidth Management," on page
Set the fields below to configure the bandwidth limit for this billing profile.
To use a pre-defined option, select the first option and choose a bandwidth from the
drop-down list box.
To manually set the bandwidth, select the second option and specify the bandwidth
in the field provided.
To use a pre-defined option, select the first option and choose a bandwidth from the
drop-down list box.
To manually set the bandwidth, select the second option and specify the bandwidth
in the field provided.
Click Reset to restart configuring this screen again.
Click Apply to save the changes.
33), then configure the PMS
Chapter 7 Billing Profiles and PMS Configuration
Section 6.1.4
133.