Editing Ppp Options; Figure 24-6 Menu 11.2 Remote Node Ppp Options - ZyXEL Communications PRESTIGE 652H User Manual

Prestige 652 Series User's Guide
Table 24-6 Menu 11.1 Remote Node Profile (Backup ISP)
FIELD
Nailed-Up Press [SPACE BAR] to select Yes to set this connection to always be
on, regardless of whether or not there is any traffic. Select No to have
Connection
this connection act as a dial-up connection.
Session
Options
Edit Filter sets This field leads to another "hidden" menu. Use [SPACE BAR] to select
Yes and press [ENTER] to open menu 11.5 to edit the filter sets. See
section 24.10 for more details.
Idle Timeout Enter the number of seconds of idle time (when there is no traffic from
the Prestige to the remote node) that can elapse before the Prestige
automatically disconnects the PPP connection. This option only
applies when the Prestige initiates the call.
Once you have configured this menu, press [ENTER] at the message "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.

24.7 Editing PPP Options

The Prestige's dial back-up feature uses PPP. To edit the remote node PPP Options, move the cursor to the
Edit PPP Options field in Menu 11.1 - Remote Node Profile (Backup ISP), and use the space bar to
select [Yes]. Press [Enter] to open menu 11.2 as shown next.
Press Space Bar to Toggle.
This table describes the Remote Node PPP Options Menu, and contains instructions on how to configure
the PPP options fields.
24-10
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Enter here to CONFIRM or ESC to CANCEL:

Figure 24-6 Menu 11.2 Remote Node PPP Options

DESCRIPTION EXAMPLE
No
(default)
No
(default)
100
seconds
(default)
Menu 2 WAN Backup Setup