Figure 4-3 Menu 11.2 - Remote Node Ppp Options; Table 4-2 Remote Node Ppp Options Menu Fields; Editing Ppp Options - ZyXEL Communications Prestige 642 User Manual

will disconnect if the negotiated protocol is different from that in the user profile, even when the negotiated
protocol is stronger than specified. If you encounter the case where the peer disconnects right after a
successful authentication, please make sure that you specify the correct authentication protocol when
connecting to such an implementation.

4.1.4 Editing PPP Options

To edit the remote node PPP Options, move the cursor to the Edit PPP Options field in Menu 11.1 -
Remote Node Profile, and use the space bar to select Yes. Press ENTER to open Menu 11.2, as shown
next.
Press Space Bar to Toggle.
Figure 4-3
The following table describes the Remote Node PPP Options Menu, and contains instructions on how to
configure the PPP options fields.
Table 4-2
Field
Encapsulation
Compression
Once you have completed filling in Menu 11.2 – Remote Node PPP Options, press [ENTER] at the
message [Press ENTER to Confirm...] to save your configuration, or press [Esc] at any time to
cancel.
Remote Node Configuration
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Press ENTER to CONFIRM or ESC to CANCEL:
Menu 11.2 - Remote Node PPP Options
Remote Node PPP Options Menu Fields
Description
Select the CISCO PPP only when this remote node is
a Cisco machine; otherwise, select the Standard
PPP.
Turn on/off Stac Compression. The default for this
field is Off.
Prestige 642 ADSL Internet Access Router
Option
Standard
PPP
CISCO
PPP
On/Off
(Default =
Off)
4-5