ZyXEL Communications PRESTIGE 652H User Manual page 423

FIELD
Keep Alive Press [SPACE BAR] to choose either Yes or No. Choose Yes and press
[ENTER] to have the Prestige automatically re-initiate the SA after the SA
lifetime times out, even if there is no traffic. The remote IPSec router must
also have keep alive enabled in order for this feature to work.
Local ID type Press [SPACE BAR] to choose IP, DNS, or E-mail and press [ENTER].
Select IP to identify this Prestige by its IP address.
Select DNS to identify this Prestige by a domain name.
Select E-mail to identify this Prestige by an e-mail address.
Content When you select IP in the Local ID Type field, type the IP address of your
computer or leave the field blank to have the Prestige automatically use its
own IP address.
When you select DNS in the Local ID Type field, type a domain name (up
to 31 characters) by which to identify this Prestige.
When you select E-mail in the Local ID Type field, type an e-mail address
(up to 31 characters) by which to identify this Prestige.
The domain name or e-mail address that you use in the Content field is
used for identification purposes only and does not need to be a real
domain name or e-mail address.
My IP Addr Enter the IP address of your Prestige. The Prestige uses its current WAN
IP address (static or dynamic) in setting up the VPN tunnel if you leave this
field as 0.0.0.0.
The VPN tunnel has to be rebuilt if this IP address changes.
Peer ID type Press [SPACE BAR] to choose IP, DNS, or E-mail and press [ENTER].
Select IP to identify the remote IPSec router by its IP address.
Select DNS to identify the remote IPSec router by a domain name.
Select E-mail to identify the remote IPSec router by an e-mail address.
VPN/IPSec Setup
Table 42-2 Menu 27.1.1 IPSec Setup
DESCRIPTION
Prestige 652 Series User's Guide
EXAMPLE
No
0.0.0.0
42-7