Chapter 36 System Information And Diagnosis; System Status; Figure 36-1 Menu 24 System Maintenance - ZyXEL Communications PRESTIGE 652H User Manual

System Information and Diagnosis
This chapter covers the information and diagnostic tools in SMT menus 24.1 to 24.4.
These tools include updates on system status, port status, log and trace capabilities and upgrades for the
system software. This chapter describes how to use these tools in detail.
Type 24 in the main menu to open Menu 24

36.1 System Status

The first selection, System Status gives you information on the status and statistics of the ports, as shown
next. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you
information on your ADSL telephone line status, number of packets sent and received.
To get to System Status, type 24 to go to Menu 24 — System Maintenance. From this menu, type 1.
System Status. There are two commands in Menu 24.1 — System Maintenance — Status. Entering 1
resets the counters; [ESC] takes you back to the previous screen.
The following table describes the fields present in Menu 24.1 — System Maintenance — Status which
are read-only and meant for diagnostic purposes.
System Information and Diagnosis
System Maintenance, as shown in the following figure.
–
Menu 24 - System Maintenance
1. System Status
2. System Information
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management
Enter Menu Selection Number:

Figure 36-1 Menu 24 System Maintenance

Prestige 652 Series User's Guide
Chapter 36
36-1