ZyXEL Communications PRESTIGE 652H User Manual page 239

LABEL
Transfer Rate This is the transfer rate in kbps.
Upstream Speed This is the upstream speed of your Prestige.
Downstream Speed This is the downstream speed of your Prestige.
Node-Link This field displays the remote node index number and link type. Link types are PPPoA,
ENET, RFC 1483 and PPPoE .
Interface This field displays the type of port.
Status For the WAN port, this displays the port speed and duplex setting if you're using Ethernet
encapsulation and down (line is down), idle (line (ppp) idle), dial (starting to trigger a
call) and drop (dropping a call) if you're using PPPoE encapsulation.
For a LAN port, this shows the port speed and duplex setting.
TxPkts This field displays the number of packets transmitted on this port.
RxPkts This field displays the number of packets received on this port.
Errors This field displays the number of error packets on this port.
Tx B/s This field displays the number of bytes transmitted in the last second.
Rx B/s This field displays the number of bytes received in the last second.
Up Time This field displays the elapsed time this port has been up.
Collisions This is the number of collisions on this port.
Poll Interval(s) Type the time interval for the browser to refresh system statistics.
Click this button to apply the new poll interval you entered in the Poll Interval field
Set Interval
above.
Stop Click this button to halt the refreshing of the system statistics.
Maintenance
Table 21-2 System Status: Show Statistics
Prestige 652 Series User's Guide
DESCRIPTION
21-5