Prestige P645 ADSL Internet Access Router
4.1.4 Editing PPP Options
To edit the remote node PPP Options, move the cursor to the Edit PPP Options field in Menu 11.1 -
Remote Node Profile, and use the [SPACE BAR] to select Yes. Press [ENTER] to open menu 11.2, as
shown next.
Press Space Bar to Toggle.
The following table describes the Remote Node PPP Options Menu, and contains instructions on how to
configure the PPP options fields.
FIELD
Encapsulation
Compression
Once you have completed filling in Menu 11.2 – Remote Node PPP Options, press [ENTER] at the
message [Press ENTER to Confirm...] to save your configuration, or press [ESC] at any time to cancel.
4.1.5 Remote Node Filter
Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing
traffic between this remote node and the Prestige. You can specify up to four filter sets separated by
4-6
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Press ENTER to CONFIRM or ESC to CANCEL:
Figure 4-3 Menu 11.2 - Remote Node PPP Options
Table 4-2 Remote Node PPP Options Menu Fields
Select CISCO PPP only when this remote node is a
Cisco machine; otherwise, select the Standard PPP.
Turn on/off Stac Compression. The default for this
field is Off.
DESCRIPTION
EXAMPLE
Standard PPP
Off
(Default)
Remote Node Configuration