Figure 21-8 Vrrp Example 1: Vrrp Parameter Settings On Switch B; Figure 21-9 Vrrp Example 1: Vrrp Status On Switch A; Figure 21-10 Vrrp Example 1: Vrrp Status On Switch B - ZyXEL Communications Dimension ES-4024 User Manual

Figure 21-8 VRRP Example 1: VRRP Parameter Settings on Switch B

After configuring and saving the VRRP configuration, the VRRP Status screens for both switches are shown next.
21.5.2 Two Subnets Example
The following figure depicts an example in which two switches share the network traffic. Hosts in the two network
groups use different default gateways. Each switch is configured to backup a virtual router using VRRP.
You wish to configure switch A as the master router for virtual router VR1 and as a backup for virtual router VR2.
On the other hand, switch B is the master for VR2 and a backup for VR1.
VRRP

Figure 21-9 VRRP Example 1: VRRP Status on Switch A

Figure 21-10 VRRP Example 1: VRRP Status on Switch B

Dimension ES-4024 Ethernet Switch
Switch A is the
master router.
21-9