ZyXEL Communications Dimension ES-4024 User Manual page 234

Dimension ES-4024 Ethernet Switch
httpd
icmp
ifconfig
igmpsnoop
igmp
ospf
35-16
Table 35-4 Command Summary: ip
COMMAND
disable
Iface <iface> enable
Iface <iface> disable
Iface <iface> ttl <ttlvalue>
route
prune
group
interface
neighbor
debug [on|off]
status
discovery <iface> [on|off]
[iface] [ipaddr] [broadcast <addr>
|mtu <value>|dynamic]
status
querier
enable
disable
debug
forwardall
querier
iface <iface>
robustness
status
Enable
Disable
abr-type
<cisco|ibm|shortcut|standard>
DESCRIPTION
Disables DVMRP.
Enables DVMRP on the interface.
Disables DVMRP on the interface.
Sets TTL threshold value for the
interface.
Displays DVMRP routing table.
Displays DVMRP prune table.
Displays DVMRP group table.
Displays DVMRP interface table.
Displays DVMRP neighbors.
Enables or disables the HTTP
debug flag.
Displays the ICMP statistics
counter.
Sets the ICMP router discovery
flag.
Configures a network interface.
Displays the IGMP group table.
Displays the port number of the
incoming port that received the
latest IGMP querier.
Turns on IGMP snooping.
Turns off IGMP snooping.
Sets IGMP debug level
Activates/deactivates IGMP
forwarding to all interfaces flag
Turns on/off IGMP stop query flag
Sets/shows IGMP related
parameters for the interface
Sets IGMP robustness variable
Displays IGMP run-time status.
Activates OSPF.
Deactivates OSPF.
Sets the area border router (ABR)
type.
Introduction to CLI