Table 35-2 Command Summary: Sys Sw - ZyXEL Communications Dimension ES-4024 User Manual

cluster
romreset
35.2.2 sys sw Commands
The following commands are system switch commands; all are preceded with
driver config
count
garp status
Introduction to CLI
Table 35-1 CLI Command Summary: sys
COMMAND
trustedHost <index>[<hostt>]
trapCommunity <index>
[<community>]
trapDest <index>[<destination>]
disp <index|all>
active <name> <vid>
inactive <name> <vid>
add <MAC addr> <password>
remove <MAC addr>
showMember
showCandidate
status

Table 35-2 Command Summary: sys sw

COMMAND
disp
clear
Dimension ES-4024 Ethernet Switch
DESCRIPTION
Sets or displays the SNMP trusted
host.
Sets or displays the SNMP Trap
community.
Sets or displays the SNMP trap
server.
Shows SNMP settings.
Enables this switch as the cluster
manager and assigns a cluster
name and VID in which the
manager belongs.
Disables cluster management.
Adds a member switch into the
cluster using its web configurator
password.
Remove a member switch from the
cluster.
Shows details of member switches
in this cluster.
Shows a list of auto-discovered
potential cluster members.
Shows whether this switch is a
cluster member, cluster manager
or neither and information about
members in the cluster.
Resets the switch back to the
factory defaults.
sys sw
DESCRIPTION
Displays the switch NDIS
settings.
Shows the switch NDIS level
counters(CPU interface)
Clears the switch NDIS level
counters(CPU interface)
Shows the GARP timer status.
35-7