Chapter 22 Static Route; Configuring Static Routes; Figure 22-1 Static Routing; Table 22-1 Static Routing - ZyXEL Communications Dimension ES-4024 User Manual

22.1 Configuring Static Routes

Static routes tell the ES-4024 how to forward IP traffic when you configure the TCP/IP parameters manually.
Click Routing Protocol, Static Routing in the navigation panel to display the screen as shown.
The following table describes the related labels you use to create a static route.
LABEL
Active This field allows you to activate/deactivate this static route.
Name Enter a descriptive name for this route. This is for identification purpose only.
Destination IP This parameter specifies the IP network address of the final destination. Routing is always based on
Address network number. If you need to specify a route to a single host, use a subnet mask of
255.255.255.255 in the subnet mask field to force the network number to be identical to the host ID.
IP Subnet Enter the subnet mask for this destination.
Mask
Static Route
This chapter shows you how to configure static routes.

Figure 22-1 Static Routing

Table 22-1 Static Routing

DESCRIPTION
Dimension ES-4024 Ethernet Switch
Chapter 22
Static Route
22-1