ZyXEL Communications Dimension ES-4024 User Manual page 226

Dimension ES-4024 Ethernet Switch
timer
gvrp trace
enable
disable
qos defpri
map
method
vlan1q
port
svlan
vlan
35-8
Table 35-2 Command Summary: sys sw
COMMAND
<join timer(ms)><leave
timer(ms)><leave all timer<ms>
<port> [<0..7>]
<0..7> [<queue>]
<port> <strict | wfq weight1
weight2 weight3 weight4 (Sum of all
weight should be 100)>
status <port>
defaultVID <port><vid>
accept <port> <all|tagged|untagged> Sets the type of frames that a port
gvrp <port> <enable|disable>
protocolVID <port><VID><protocol>
vlanTrunking<port><enable/disable>
cpu <vlan id>
setentry<name><vid><port><adctl>
<tagctl>
delentry <vid>
active <vid>
inactive <vid>
list
list <all|vid|start_vid end_vid>
DESCRIPTION
Sets the GARP timer's Join
Timer, Leave Timer and Leave All
Timer.
Sets GVRP trace level.
Enables GVRP.
Disables GVRP.
Sets the default ingress User
Priority for a port.
Maps a User Priority to a Traffic
Class.
Sets QoS method. For WFQ, the
total sum must be 100.
All "sys sw vlan1q" commands
relate to IEEE 802.1Q Tagged
VLAN configuration. Use "config
save" to save your configuration
changes.
Shows a port's VLAN information.
Sets the default VLAN ID of a
port.
accepts.
Enables/disables GVRP on the
specified port.
Sets protocol-based pvid for the
specific port.
Activates/Deactivates VLAN
trunking on a port.
Sets the VLAN ID of the
management VLAN (CPU).
Applies a static VLAN (name,
admin control tag, tag control) to
a port.
Deletes the specified (VID) static
VLAN.
Turns on the specified static
VLAN.
Turns off the specified static
VLAN.
Displays a table of static VLANs.
Shows the specified IEEE 802.1Q
Tagged VLAN table.
Introduction to CLI