GS-3012/GS-3012F User's Guide
C:\> ftp <Cluster Manager IP address>
Connected to 192.168.0.1.
220 GS-3012F FTP version 1.0 ready at Thu Jan
User (192.168.0.1:(none)): admin
331 Enter PASS command
Password:
230 Logged in
ftp> ls
200 Port command okay
150 Opening data connection for LIST
--w--w--w-
1 owner
-rw-rw-rw-
1 owner
--w--w--w-
1 owner
-rw-rw-rw-
1 owner
226 File sent OK
ftp: 296 bytes received in 0.01Seconds 19.73Kbytes/sec.
ftp> put 360ABM0.bin fw-00-13-49-00-00-02
ftp> bye
Figure 27-4 Example: Uploading Firmware to a Cluster Member Switch
The following table explains some of the FTP parameters.
FTP PARAMETER
User name
Password
ls
fw-00-13-49-00-00-02
config-00-13-49-00-00-02
360ABM0.bin
27.3 Configuring Cluster Management
Click Configuration from the Cluster Management screen to display the next screen.
27-4
group
3075006 Jul 01 12:00 ras
group
393216 Jul 01 12:00 config
group
group
Table 27-3 FTP Upload to Cluster member Example
Press [ENTER]
The web configurator password default is 1234.
Enter this command to list the name of cluster member switch's firmware and
configuration file.
The cluster member switch's firmware name as seen in the cluster manager switch.
The cluster member switch's configuration file name as seen in the cluster manager
switch.
The name of the firmware file you want to upload to the cluster member switch.
1 00:31:12 1970
0 Jul 01 12:00 fw-00-13-49-00-00-02
0 Jul 01 12:00 config-00-13-49-00-00-02
DESCRIPTION
Cluster Management