ZyXEL Communications Dimension ES-4024 User Manual page 230

Dimension ES-4024 Ethernet Switch
disable
type
display
interval
set
del
mac static
ageSet
ageView
filter
applyidx
del
disable
display
l2set
mirror
35-12
Table 35-2 Command Summary: sys sw
COMMAND
<dir (ingress/egress)> <type
(broadcast/multicast/both)>
[index]
[value]
<port><threshold><direction>
<index>
disable
display [<mac> <vid>]
set <port> <MAC> <vid>
del <port> <MAC> <vid>
<timeout>
<class index>
<Class Idx>
<src port><src mac><src vid><dest
port><dest mac><dest vid>
DESCRIPTION
Clears current run-time settings
Specifies the type of frames to
limit in the switch; broadcast,
multicast or both.
Displays broadcast storm control
ports' settings
Sets/displays the monitor interval.
Specifies the packet threshold
and direction (ingress/egress) on
the specified port.
Disables broadcast storm control
on this port.
Displays static MAC addresses.
Clears current run-time static
MAC address settings
Displays current run-time static
MAC addresses on the ports.
Configures a static MAC address
on the specified port.
Deletes a static MAC address on
the specified port.
Sets aging timeout.
Displays the aging timeout period.
The following commands relate to
port filters. Port filtering means
sifting traffic from one or all ports
to one or all ports based on the
source and/or destination MAC
addresses and VLAN group.
Apply class to a filter.
Deletes filter class.
Clears current run-time filters.
Displays current run-time filter
status.
Creates a filter rule using
source/destination port, MAC
address and VLAN group
information. "*" means "any".
The following commands relate to
port mirrors. Port mirroring is
copying traffic from one or all
ports to another or all ports for
external analysis.
Introduction to CLI