ZyXEL Communications Dimension ES-4024 User Manual page 227

status
rstp
bridge
port
lacp
agg
port
Introduction to CLI
Table 35-2 Command Summary: sys sw
COMMAND
enable
disable
priority <priority>
maxage <Max_Age>
hellotime <Hello_Time>
forwardDelay <Forward_Delay_Time>
version <STP:0|RSTP:2>
enable <port_no>
disable <port_no>
pathCost <Port_NO> <Cost|0:Auto>
priority <Port_NO> <Priority>
edgeport <port_no>
p2pLink <Port_NO>
<Auto:2|True:1|False:0>
mcheck <Port_NO>
enable <port_no>
disable <port_no>
status <port_no>
Dimension ES-4024 Ethernet Switch
DESCRIPTION
Shows the IEEE 802.1Q tagged
status.
All "sys sw rstp" commands relate
to rapid STP configuration. Refer
to IEEE Std 802.1w. Use "config
save" to save your configuration
changes.
Enables RSTP.
Disables RSTP.
Sets the system priority.
Sets the max age timer
Sets the hello timer.
Sets the forward delay time
Displays/enables the STP mode;
STP or RSTP. RSTP is the
default used when configuring
STP via web configurator.
Enables RSTP on this port.
Disables RSTP on this port.
Sets the specified port's path
cost.
Sets the specified port's priority.
Displays if this port is an edge
port.
Sets the specified port can
connect to one bridge or multiple
bridges.
Enables the Port Protocol
Migration state machine
(Disabled, Blocking, Listening,
Learning, Forwarding) on the
specified port.
Refer to IEEE 802.3ad for more
information on link aggregation
control protocol.
Displays ports trunked using
LACP.
Enables LACP on the specified
port.
Disables LACP on the specified
port.
Displays whether LACP is
enabled on the specified port.
35-9