Static Mac Forward Setup; Introduction To Static Mac Forward Setup; Configuring Static Mac Forwarding; Figure 8-1 Advanced: Static Mac Forwarding - ZyXEL Communications Dimension ES-4024 User Manual

8.1 Introduction to Static MAC Forward Setup

A static MAC address is an address that has been manually entered in the MAC address learning table. Static
MAC addresses do not age out. When you set up static MAC address rules, you are setting static MAC addresses
for a port. This may reduce the need for broadcasting.

8.2 Configuring Static MAC Forwarding

Click Advanced Applications, Static MAC Forwarding in the navigation panel to display the configuration
screen as shown.
The following table describes the labels in this screen.
LABEL
Active Select this check box to activate your rule. You may temporarily deactivate a rule without deleting
it by clearing this check box.
Name Enter a descriptive name for identification purposes for this static MAC address forwarding rule.
MAC Address Enter the MAC address in valid MAC address format, that is, six hexadecimal character pairs.
Static MAC addresses do not age out.

Static MAC Forward Setup

Static MAC Forward Setup
Use these screens to configure static MAC address forwarding.

Figure 8-1 Advanced: Static MAC Forwarding

Table 8-1 Advanced: Static MAC Forwarding

Dimension ES-4024 Ethernet Switch
DESCRIPTION
Chapter 8
8-1