Figure 11-3 Bandwidth Control: Summary Table; Table 11-2 Bandwidth Control: Summary Table - ZyXEL Communications Dimension ES-4024 User Manual

Dimension ES-4024 Ethernet Switch
The following table describes the labels in this screen.
LABEL
Index This field displays the index number of a bandwidth control rule. Click this number to edit the rule
settings.
Active This field indicates whether the bandwidth control rule is enabled (Yes) or disabled (No).
Name This field displays the descriptive name of the rule.
Max. This field displays the maximum bandwidth allowed in kilobits per second (kbps) for the rule.
Bandwidth
Rule This field displays the network layer (Layer 2 or Layer3) to which this rule applies.
Source For Layer 2 rules, this field displays the source port number, the source MAC address with the
VLAN identification number to which the MAC address belongs or a combination of the two.
For Layer 3 rules, this field displays the source protocol socket number, the source IP address and
the number of ones in the subnet mask octet or a combination of the two.
All Entries means all IP/MAC addresses from all ports.
Destination For Layer 2 rules, this field displays the destination protocol port number, the destination MAC
address with the VLAN identification number to which the MAC address belongs or a combination of
the two.
For Layer 3 rules, this field displays the destination protocol socket number, the destination IP
address and the number of ones in the subnet mask octet or a combination of the two.
All Entries means all IP/MAC addresses from all ports.
Delete To delete a rule, select its checkbox in this column and then click the Delete button.
Add To add a rule, click this button.
Delete Click Delete to remove the selected entry from the summary table.
Cancel Click Cancel to clear the Delete check boxes.
11-6

Figure 11-3 Bandwidth Control: Summary Table

Table 11-2 Bandwidth Control: Summary Table

DESCRIPTION
Bandwidth Control