ZyXEL Communications Dimension ES-4024 User Manual page 204

Dimension ES-4024 Ethernet Switch
LABEL
Cancel Click Cancel to begin configuring this part of the screen afresh.
Clustering Candidate The following fields relate to the switches that are potential cluster members.
List A list of suitable candidates found by auto-discovery is shown here. The switches must be
directly connected. Directly connected switches that are set to be cluster managers will not
be visible in the Clustering Candidate list. Switches that are not in the same management
VLAN group will not be visible in the Clustering Candidate list.
Password Each cluster member's password is its web configurator password. Select a member in the
Clustering Candidate list and then enter its web configurator password. If that switch
administrator changes the web configurator password afterwards, then it cannot be
managed from the Cluster Manager. Its Status is displayed as Error in the Cluster
Management Status screen and a warning icon (
below.
If multiple devices have the same password then hold [SHIFT] and click those switches to
select them. Then enter their common web configurator password.
Add Click Add to save this part of the screen to the switch.
Cancel Click Cancel to begin configuring this part of the screen afresh.
Refresh Click Refresh to perform auto-discovery again to list potential cluster members.
The next summary table shows the information for the clustering members configured.
Index This is the index number of a cluster member switch.
HwAddr This is the cluster member switch's hardware MAC address.
Name This is the cluster member switch's System Name.
Model This is the cluster member switch's model name.
Remove Select this checkbox and then click the Remove button to remove a cluster member switch
from the cluster.
Cancel Click Cancel to begin configuring this part of the screen afresh.
29-6
Table 29-4 Clustering Management Configuration
DESCRIPTION
) appears in the member summary list
Cluster Management