ZyXEL Communications Dimension ES-4024 User Manual page 235

Introduction to CLI
Table 35-4 Command Summary: ip
COMMAND
auto-cost reference-bandwidth <1-
4294967>
default-metric <0-16777214>
neighbor A.B.C.D [priority <0-
255>] [poll-interval <1-65535>]
network A.B.C.D/M area
[A.B.C.D|<0-4294967295>]
passive-if <iface> [A.B.C.D]
redistribute [rip|bgp|static]
[metric-type 1|2] | [metric <0-
16777214>]
refresh timer <10-1800>
rfc1583
router-id <A.B.C.D>
timers spf <0-4294967295 (Delay
Timer)> <0-4294967295 (Hold
Timer)>
area auth <0-4294967295|A.B.C.D>
<none|simple|md>
area default-cost <0-
4294967295|A.B.C.D> <0-16777215>
area stub <0-4294967295|A.B.C.D>
[no-summary]
area virtual-link <0-
4294967295|A.B.C.D> A.B.C.D [...]
area clear auth <0-
4294967295|A.B.C.D>
area clear default-cost <0-
4294967295>|A.B.C.D) <0-16777215>
area clear stub <0-
4294967295>|A.B.C.D> [no-summary]
area clear virtual-link <0-
4294967295|A.B.C.D> A.B.C.D [...]
iface auth <iface>
[none|simple|md] [A.B.C.D]
iface cost <iface> <1-65535>
[A.B.C.D]
Dimension ES-4024 Ethernet Switch
DESCRIPTION
Sets the cost associated to the
interface. The ES calculates the
cost based on the reference
bandwidth.
Sets the default metric value
Adds a neighbor.
Adds a network to an area.
Sets an interface to passive. A
passive interface does not
receive/send packets.
Sets OSPF to import/export routes
to other routing protocols.
Sets the time (in seconds) to
update OSPF information.
Sets the router ID.
Sets the delay and hold timers.
Sets the authentication method of
an area.
Sets the default cost of an area.
Sets an area as a stub area.
Adds a virtual link(s) to an area.
Erases the authentication settings
of an area.
Erases the default cost of an area.
Erases the stub settings of an
area.
Erases the virtual link settings of
an area.
Sets the authentication method of
an interface.
Sets the cost of an interface.
35-17