Port Setup - ZyXEL Communications ES-2024A User Manual

ES-2024A User's Guide
Table 11 IP Setup (continued)
LABEL
VID
Apply
Cancel
Management IP Addresses
Configure the fields to set additional management IP address.
IP Address
IP Subnet
Mask
VID
Add
Cancel
Index
IP Address
Subnet Mask This field displays the subnet mask of the switch.
VID
Delete
Cancel

7.8 Port Setup

Click Basic Setting and then Port Setup in the navigation panel to enter the port
configuration screen.
62
DESCRIPTION
Enter the VLAN identification number associated with the switch IP address. This is the
VLAN ID of the CPU and is used for management only. The default is "1". All ports, by
default, are fixed members of this "management VLAN" in order to manage the device
from any port. If a port is not a member of this VLAN, then users on that port cannot
access the device. To access the switch make sure the port that you are connected to is
a member of Management VLAN.
Click Apply to save the settings.
Click Cancel to reset the fields to your previous configuration.
Enter the IP address for managing the switch by the members of the VLAN specified in
the VID field below.
Enter the IP subnet mask in dotted decimal notation. For example, 255.255.255.0.
Enter the VLAN identification number.
Click Add to save the new rule to the switch. It then displays in the summary table at the
bottom of the screen.
Click Cancel to reset the fields to your previous configuration.
This field displays the index number of an entry.
This field displays the management IP address of the switch.
This field displays the VLAN identification number of the network.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
Chapter 7 Basic Setting