ES-2024A User's Guide
Figure 80 Access Control: Remote Management
The following table describes the labels in this screen.
Table 48 Access Control: Remote Management
LABEL
Entry
Active
Start Address
End Address
Telnet/FTP/
Web/ICMP/
SNMP/SSH/
HTTPS
Apply
Cancel
132
DESCRIPTION
This is the client set index number. A "client set" is a group of one or more "trusted
computers" from which an administrator may use a service to manage the switch.
Select this check box to activate this secured client set. Clear the check box if you
wish to temporarily disable the set without deleting it.
Configure the IP address range of trusted computers from which you can manage this
switch.
The switch checks if the client IP address of a computer requesting a service or
protocol matches the range set here. The switch immediately disconnects the session
if it does not match.
Select services that may be used for managing the switch from the specified trusted
computers.
Click Apply to save your changes back to the switch.
Click Cancel to begin configuring this screen afresh.
Chapter 22 Access Control