ZyXEL Communications ES-2024A User Manual page 141

ES-2024A User's Guide
Table 53 Clustering Management Configuration (continued)
LABEL
Password
Add
Cancel
Refresh
The next summary table shows the information for the clustering members configured.
Index
HwAddr
Name
Model
Remove
Cancel
140
DESCRIPTION
Each cluster member's password is its web configurator password. Select a
member in the Clustering Candidate list and then enter its web configurator
password. If that switch administrator changes the web configurator password
afterwards, then it cannot be managed from the Cluster Manager. Its Status is
displayed as Error in the Cluster Management Status screen and a warning
icon ( ) appears in the member summary list below.
If multiple devices have the same password then hold [SHIFT] and click those
switches to select them. Then enter their common web configurator password.
Click Add to save this part of the screen to the switch.
Click Cancel to begin configuring this part of the screen afresh.
Click Refresh to perform auto-discovery again to list potential cluster members.
This is the index number of a cluster member switch.
This is the cluster member switch's hardware MAC address.
This is the cluster member switch's System Name.
This is the cluster member switch's model name.
Select this checkbox and then click the Remove button to remove a cluster
member switch from the cluster.
Click Cancel to begin configuring this part of the screen afresh.
Chapter 24 Cluster Management