Front Panel Leds; Table 2 Front Panel Leds - ZyXEL Communications ES-2024A User Manual

To connect the power to the switch, insert the female end of power cord to the power
receptacle on the rear panel. Connect the other end of the supplied power cord to the power
source. Make sure that no objects obstruct the airflow of the fans.

3.3 Front Panel LEDs

The LEDs are located on the front panel. The following table describes the LEDs on the front
panel.

Table 2 Front Panel LEDs

LED
PWR
SYS
ALM
LNK/ACT
(Ethernet
ports)
FDX/COL
(Ethernet
ports)
100/1000
ACT
LNK (mini
GBIC
Slots)
ACT (mini
GBIC
Slots)
Chapter 3 Hardware Overview
COLOR STATUS DESCRIPTION
Green On The system is turned on.
Off The system is off.
Green Blinking The system is rebooting and performing self-diagnostic tests.
On The system is on and functioning properly.
Off The power is off or the system is not ready/malfunctioning.
Red On There is a hardware failure.
Off The system is functioning normally.
Green Blinking The system is transmitting/receiving to/from a 10 Mbps Ethernet
network.
On The link to a 10 Mbps Ethernet network is up.
Amber Blinking The system is transmitting/receiving to/from a 100 Mbps Ethernet
network.
On The link to a 100 Mbps Ethernet network is up.
Off The link to an Ethernet network is down.
Amber Blinking The Ethernet port is negotiating in half-duplex mode and collisions
are occurring; the more collisions that occur the faster the LED
blinks.
On The Ethernet port is negotiating in full-duplex mode.
Off The Ethernet port is negotiating in half-duplex mode and no
collisions are occurring.
Green On The link to a 1000 Mbps Ethernet network is up.
Amber On The link to a 100 Mbps Ethernet network is up.
Off The link to an Ethernet network is down.
Green Blinking The port is receiving or transmitting data.
On The port has a connection to an Ethernet network but not
receiving or transmitting data.
Off The link to an Ethernet network is down.
Green On The port has a successful connection.
Off No Ethernet device is connected to this port.
Green Blinking The port is sending or receiving data.
Off The port is not sending or receiving data.
ES-2024A User's Guide
37