Configure A Static Vlan; Table 14 Vlan: Vlan Status - ZyXEL Communications ES-2024A User Manual

Table 14 VLAN: VLAN Status

LABEL
The Number of
VLAN
Index
VID
Port Number
Elapsed Time
Status
Poll Interval(s)
Stop
Change Pages

8.5.2 Configure a Static VLAN

To configure a static VLAN, click Static VLAN in the VLAN Status screen to display the
screen as shown next.
Chapter 8 VLAN
DESCRIPTION
This is the number of VLANs configured on the switch.
This is the VLAN index number.
This is the VLAN identification number that was configured in the VLAN Setup
screen.
This column displays the ports that are participating in a VLAN. A tagged port is
marked as T, an untagged port is marked as U and ports not participating in a VLAN
are marked as "–".
This field shows how long it has been since a normal VLAN was registered or a static
VLAN was set up.
This field shows how this VLAN was added to the switch; dynamically using GVRP or
statically, that is, added as a permanent entry.
The text box displays how often (in seconds) this screen refreshes. You may change
the refresh interval by typing a new number in the text box and then clicking Set
Interval.
Click Stop to halt polling statistics.
Click Previous Page or Next Page to show the previous/next screen if all status
information cannot be seen in one screen.
ES-2024A User's Guide
69