Ping; Traceroute; Figure 103 Show Mac Address-Table Command Example; Figure 104 Ping Command Example - ZyXEL Communications ES-2024A User Manual

ES-2024A User's Guide
= Specifies the sorting criteria (MAC, VID or port).
<sort>
This command displays the MAC address(es) stored in the switch. The following example
shows the MAC address table.

Figure 103 show mac address-table Command Example

ras# show mac address-table all
Port
2
ras#

28.3 ping

Syntax:
where
<ip>
[vlan <vlan-id> ]
[size <0-8024> ]
[ -t ]
This command sends Ping packets to an Ethernet device. The following example sends Ping
requests to and displays the replies from an Ethernet device with an IP address of
192.168.1.100

Figure 104 ping Command Example

ras# ping 192.168.1.100
sent rcvd
1
2
3
ras#

28.4 traceroute

Syntax:
170
VLAN ID MAC Address
1 00:85:a0:01:01:04
ping <ip> < [vlan <vlan-id> ] [ size <0-8024> ] [ -t ]>
= The IP address of an Ethernet device.
= Specifies the VLAN ID to which the Ethernet device belongs.
= Specifies the packet size to send.
= Sends Ping packets to the Ethernet device indefinitely. Click
[CTRL]+ C
.
rate rtt avg
1 100 0
2 100 0
3 100 0
traceroute <ip> [vlan <vlan-id>][ttl <1-255>] [wait <1-60>]
[queries <1-10>]
Type
Dynamic
to terminate the Ping process.
mdev max
0 0 0
0 0 0
0 0 0
Chapter 28 Command Examples
min reply from
0 192.168.1.100
0 192.168.1.100
0 192.168.1.100