Table of Contents
Advertisement
Setting the synchronization schedule
You can set a synchronization schedule in
either of the following situations:
If you use Microsoft Exchange Server
2007, or Microsoft Exchange Server
2003 with Service Pack 2: By default,
wireless sync takes place anytime info is
updated on either your smartphone or the
server using Microsoft Direct Push. To
save battery life, however, you can set
synchronization to take place at intervals
that you specify.
If you use Microsoft Exchange Server
2003 that is not upgraded to Service
Pack 2: By default, wireless sync does not
take place automatically. Set a
synchronization schedule to have sync take
place either anytime info is updated on
your smartphone or the server, or at certain
intervals.
1 Press Home
Start
(left softkey).
2 Press More
(left softkey) twice
and select ActiveSync
and then press
.
S Y N C H R O N I Z I N G I N F O R M A T I O N
3 Press Menu
select Schedule.
4 Set any of the following options:
Peak times: Sets the frequency for
high-traffic time periods such as when
you are at work or when email volume
is high.
Off-peak times: Sets the frequency for
low-traffic time periods such as late at
night.
Use above settings when roaming:
Sets the frequency while you are
roaming outside your wireless service
provider's network. You should keep
this box checked to ensure that wireless
sync works properly.
S E T T I N G U P W I R E L E S S S Y N C H R O N I Z A T I O N
(right softkey) and
5
95
Advertisement
Table of Contents
