Palm Treo 500 User Manual page 72

4
Y O U R P H O N E
BEFORE YOU BEGIN
phone is on and that you're inside a
coverage area (see Turning your phone on).
1 Press Home
Start
2 Press More
select Settings
3 Select Phone.
4 Select More and then select GSM/3G
Networks.
5 Select the Network list and then select
one of the following:
Automatic: Automatically selects a
network.
GSM: Connects only to GSM networks.
72
C U S T O M I Z I N G P H O N E S E T T I N G S
Make sure your
and then press
(left softkey).
(left softkey) and
.
6 Press Done (left softkey).
7 If prompted, turn off your smartphone
(see Turning your smartphone off).
Manually selecting your network settings
The network settings are
IMPORTANT
preset for optimum performance. Do not
change these settings unless instructed to
do so by a representative from your
wireless service provider. The network
settings options vary according to your
wireless service provider.
BEFORE YOU BEGIN
phone is on and that you're inside a
coverage area (see Turning your phone on).
1 Press Home
Start (left softkey).
2 Press More (left softkey) and
select Settings
3 Select Phone.
4 Select More and then select Networks.
Make sure your
and then press
.