Table of Contents
Advertisement
12
Y O U R A P P L I C A T I O N A N D I N F O M A N A G E M E N T T O O L S
3 Select the name of the receiving device.
4 Wait for Done to appear next to the
name of the receiving device before you
continue using your smartphone.
The regional setting determines the list of
TIP
characters that can be used when info is
beamed between devices. If you try to send
or receive a character that is not on the list, it
appears as a question mark (see Setting
display formats).
Turning on the option to receive beamed
information
By default, the option to receive beamed
information on your smartphone is turned
off. You need to turn the beam option on
before you can receive information being
beamed from another device.
228
B E A M I N G I N F O R M A T I O N
1 Press Home
Start
(left softkey).
2 Press More
(left softkey) and
select Settings
3 Select Connections and then select
Beam.
4 Check the Receive incoming beams
box.
Receiving beamed information
BEFORE YOU BEGIN
smartphone has both the Bluetooth feature
(see Entering basic Bluetooth settings) and
the option to receive beamed information
(see Turning on the option to receive
beamed information) turned on.
1 Turn on your screen if it is not already
on.
2 When the Receiving Data message
appears, select Yes to receive the
beam.
If the option to receive beamed
TIP
information is turned on but you can't receive
beamed info, try a soft reset (see Resetting
your smartphone).
and then press
.
Make sure your
Advertisement
Table of Contents
