Table of Contents
Advertisement
2
S E T T I N G U P
2 If the battery is installed, remove it.
Slide your finger under the left side of
the battery and lift up to remove it.
3 With the metal contacts facing the
battery compartment, slide the SIM
card into the cutout in the lower-left
corner of the compartment until you
feel the card click into place. Align the
notches to make sure you have the card
oriented correctly.
20
I N S E R T I N G T H E S I M C A R D A N D B A T T E R Y
Notch
4 Align the metal contacts on the battery
with the contacts inside the battery
compartment, insert the battery into the
compartment at a 45-degree angle and
press it into place. Make sure the gold
battery contacts are aligned exactly with
the gold smartphone contacts.
5 Slide the battery door back into place.
6 Press and hold Power
Palm
logo appears.
®
If your smartphone does not turn on after
TIP
you insert the battery, you need to connect it
to the AC charger to charge it (see Charging
the battery). If it still doesn't turn on, perform a
soft reset (see Performing a soft reset).
7 If your SIM card is not already activated,
follow the activation steps provided by
Battery
contacts
Smartphone
contacts
until the
Advertisement
Table of Contents
