Muratec MFX-1450 User Manual page 379

WorkGroup
Enter an exstng workgroup name to dentfy the group of computers that your
machne s assocated wth.
1
2
3
NOTE
• If there s not workgroup n your network, enter a doman name or NetBIOS
doman name of your network. For example, f your doman s muratec.local,
enter "muratec" n the Workgroup settng. Consult your network admnstrator
about the doman name.
4
5
DA7-909H0-60.indb 39
Open the SMB settng menu dsplay. (Refer to page 9-36.)
Press [WorkGroup].
Enter an exstng workgroup name.
Press [Enter]. The dsplay returns to the SMB settng menu.
You may configure addtonal settngs.
To return to the Standby mode, press <Reset>.
After you have regstered the network settngs please reboot the machne to
enable the new settngs. To reboot the machne, shutdown the OfficeBrdge
first, then turn the machne OFF and after three or more seconds, turn the
machne back ON. (See "Turnng off the power," page 1-18.)
n 9-39
Etwork SEttingS
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
2007/04/26 20:14:18