Fax Partition Inoperative. Contact System Administrator; Fax Server 'To Format' Not Set Up. Contact System Administrator; Fax Station Name Not Set Up; Fax Station Number Not Set Up - Lexmark X952DTE User Manual

Troubleshooting

Fax partition inoperative. Contact system administrator.

The fax partition appears to be corrupted. Try one or more of the following:
•
Touch Continue to clear the message.
• Turn the printer off and then back on to reset the printer. If the message appears again, then contact your system
support person.

Fax server 'To Format' not set up. Contact system administrator.

The printer is in Fax Server mode, but the Fax Server setup has not been completed.
Try one or more of the following:
•
Touch Continue to clear the message.
•
Complete the Fax Server setup. If the message appears again, contact your system support person.

Fax Station Name not set up

The Fax Station Name has not been entered. Sending and receiving faxes is disabled until fax is configured properly.
Try one or more of the following:
•
Touch Continue to clear the message.
•
Complete the Analog Fax Setup. If the message appears again, contact your system support person.

Fax Station Number not set up

The Fax Station Number has not been entered. Sending and receiving faxes is disabled until fax is configured properly.
Try one or more of the following:
•
Touch Continue to clear the message.
•
Complete the Analog Fax Setup. If the message appears again, contact your system support person.

Insert Tray [x]

Insert the specified tray into the printer.

Insert the hole punch box

Insert the hole punch box into the finisher, and then touch Continue to clear the message.

Install Tray [x]

Try one or more of the following:
•
Install the specified tray:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Install the specified tray.
300