Lexmark X952DTE User Manual page 94

Paper and specialty media guidelines
Size
Tabloid
Universal
Envelopes (any size)
*
For the Universal paper size, the finishing edge must be at least 9 in. (229 mm) for a 3‑hole punch and 10 in. (254 mm) for
a 4‑hole punch.
Punch—Select from two‑, three‑, or four‑hole punch
Single staple—Use only one staple
Double staple—Use two staples
Double dual staple—Use two sets of two staples. This setting is supported only for widths between 8 in. (203 mm) and
12 in. (297 mm) with lengths between 7 in. (182 mm) and 17 in. (432 mm).
Bin 2 (booklet‑maker)
Bin 2 is available only when the booklet finisher is installed. The paper capacity of Bin 2 (booklet‑maker) is 300 sheets
or 20 sets of 15‑sheet booklets.
Bin 2 finishing features
Size
A3
A4 (only SEF)
A5
Executive
Folio
JIS B4
JIS B5
Legal
Letter (only SEF)
Statement
Tabloid
Universal
Envelopes (any size)
SEF—The paper is loaded in the short edge orientation. The short edge of the paper enters the printer first.
Bi fold—Each page is individually folded and stacked separately.
Booklet fold—A multiple-page job is folded along the center into a single booklet.
Saddle staple—A booklet‑fold print job is stapled along the center fold.
*
Offset
Punch
X X
Bi fold
X
X
X
X
X
X
Single/Double staple
X
Booklet fold
X
X
X
X
X
X
Double dual staple
X
X
Saddle staple
X
X
X
X
X
X
94