Faxing; Setting Up The Printer To Fax - Lexmark MX421 User Manual

Faxing

Faxing

Setting up the printer to fax

Notes:
•
The following connection methods are applicable only in some countries or regions.
•
During the initial printer setup, clear the fax function check box and any other function you plan to set up
later, and then select Continue.
•
If the fax function is enabled and not fully set up, then the indicator light may blink red.
Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch cables or the printer
in the area shown while actively sending or receiving a fax.
Supported fax
Printer model
MB2442adwe
MB2546ade
MB2546adwe
1
Needs a subscription. For more information, go to
you purchased the printer.
2
Needs an installed license bundle. For more information, contact the place where you purchased the printer.
Analog fax
etherFAX
1 Fax server
https://www.etherfax.net/lexmark
Fax over IP (FoIP)
or contact the place where
55
2