Lexmark X952DTE User Manual page 318

Troubleshooting
•
Dark print
• Skewed lines
•
Smudges
•
Streaks
•
Unexpected characters
• White lines in print
Try one or more of the following:
C
LEAR ANY ERROR MESSAGES
Check the display and clear any error messages.
R
EPLACE THE TONER OR PRINT CARTRIDGE
When the print remains faded, replace the toner or print cartridge.
C
LEAN THE SCANNER GLASS
The scanner glass may be dirty. Clean the scanner glass with a clean, lint‑free cloth dampened with water.
For more information, see "Cleaning the scanner glass" on page 240.
A
DJUST THE TONER DARKNESS OF THE COPY
Adjust the toner darkness from the Copy menus.
M
AKE SURE THE QUALITY OF THE ORIGINAL DOCUMENT IS SATISFACTORY
Check the quality of the original document.
P
LACE THE ORIGINAL DOCUMENT PROPERLY
Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
M
AKE SURE TO USE THE APPROPRIATE
When patterns (moiré) appear in the output:
•
On the Copy screen make sure the Content Type and Source settings are appropriate for the document being
scanned.
• From the Copy screen, navigate to:
Advanced Options > Advanced Imaging > Sharpness > lower the Sharpness setting
•
On the Copy screen, make sure no scaling is being selected.
C
OPY SETTINGS
318