Lexmark X952DTE User Manual page 63

Additional printer setup
5
Locate the printer that has changed.
Note: If there is more than one copy of the printer, then update all of them with the new IP address.
6
Right‑click the printer.
7
Click Properties > Ports tab.
8
Select the port from the list, and then click Configure Port.
9
Type the new IP address in the "Printer Name or IP Address" field.
10
Click OK > Close.
For Macintosh users
1
Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
•
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
•
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
Note: You will need the IP address if you are configuring access for computers on a different subnet than
the printer.
2
Add the printer:
•
For IP printing:
In Mac OS X version 10.5 or later
a
From the Apple menu, navigate to:
System Preferences > Print & Fax
b
Click +, and then click the IP tab.
c
Type the IP address of your printer in the Address field, and then click Add.
In Mac OS X version 10.4 or earlier
a
From the Finder, navigate to:
Applications > Utilities
b
Double‑click Printer Setup Utility or Print Center.
c
From the Printer List, click Add, and then click IP Printer.
d
Type the IP address of your printer in the Address field, and then click Add.
•
For AppleTalk printing:
Note: Make sure AppleTalk is activated on your printer.
In Mac OS X version 10.5
a
From the Apple menu, navigate to:
System Preferences > Print & Fax
b
Click +, and then navigate to:
AppleTalk > select the printer from the list > Add
63