For Macintosh Users - Lexmark X952DTE User Manual

Additional printer setup

For Macintosh users

1
Allow the network DHCP server to assign an IP address to the printer.
2
Obtain the printer IP address. You can:
a
View the information on the printer control panel home screen, or in the TCP/IP section under the
Networks/Ports menu.
b
Print a network setup page or menu settings page and locate the information in the TCP/IP section.
Note: You will need the IP address if you are configuring access for computers on a different subnet than the
printer.
3
Install the printer drivers, and then add the printer.
a
Install a printer driver file on the computer:
1
Insert the Software and Documentation CD, and then double‑click the installer package for the printer.
2
Follow the instructions on the computer screen.
3
Select a destination, and then click Continue.
4
From the Easy Install screen, click Install.
5
Type the user password, and then click OK.
All the necessary applications are installed in the computer.
6
Click Close when installation is complete.
b
Add the printer:
• For IP printing:
In Mac OS X version 10.5 or later
1
From the Apple menu, navigate to:
System Preferences > Print & Fax
2
Click +, and then click the IP tab.
3
Type the printer IP address in the address field, and then click Add.
In Mac OS X version 10.4 or earlier
1
From the Finder, navigate to:
Applications > Utilities
2
Double‑click Printer Setup Utility or Print Center.
3
From the Printer List, click Add, and then click IP Printer.
4
Type in the printer IP address in the address field, and then click Add.
• For AppleTalk printing:
Note: Make sure AppleTalk is activated on your printer.
In Mac OS X version 10.5
1
From the Apple menu, navigate to:
System Preferences > Print & Fax
2
Click +, and then navigate to:
AppleTalk > select the printer from the list > Add
61