Lexmark X952DTE User Manual page 59

Additional printer setup
Configure the printer for wireless access
1
Type the network name (SSID) in the appropriate field.
2
Select Infrastructure as your Network Mode setting if you are using an access point (wireless router).
3
Select the type of security you want to use to protect your wireless network.
4
Enter the security information necessary for the printer to connect to the wireless network.
5
Click Submit.
6
Open the AirPort application on your computer:
In Mac OS X version 10.5 or later
From the Apple menu, navigate to:
System Preferences > Network > AirPort
In Mac OS X version 10.4 or earlier
From the Finder, navigate to:
Applications > Internet Connect > AirPort
7
From the Network pop‑up menu, select the name of your wireless network.
Configure your computer to use the printer wirelessly
To print on a network printer, each Macintosh user must install a custom printer driver file and create a print queue in
the Printer Setup Utility or Print Center.
1
Install a printer driver file on the computer:
a
Insert the Software and Documentation CD, and then double‑click the installer package for the printer.
b
Follow the instructions on the computer screen.
c
Select a destination, and then click Continue.
d
From the Easy Install screen, click Install.
e
Type the user password, and then click OK.
All necessary applications are installed in the computer.
f
Click Close when installation is complete.
2
Add the printer:
a
For IP printing:
In Mac OS X version 10.5 or later
1
From the Apple menu, navigate to:
System Preferences > Print & Fax
2
Click +, and then click the IP tab.
3
Type the IP address of the printer in the address field, and then click Add.
In Mac OS X version 10.4 or earlier
1
From the Finder, navigate to:
Applications > Utilities
2
Double‑click Printer Setup Utility or Print Center.
59